Advertise on podcast: 3D Hangouts

This week @adafruit special guest Brent Rubell joins to chat about the Adafruit Marquee interface builder for e-ink displays and supported hardware.  Noe is showcasing his built-in USB hub for the Ikea MITTZON desk. Pedro releases a video on Adafruit Marquee. Checking out this week’s Timelapse Tuesday model of a knighted cat and community makes. Adafruit Marquee https://marquee.adafruit-playground.com/ USB hub for Ikea Mittzon https://learn.adafruit.com/4-port-usb-hub-for-ikea-mittzon-desk/ Marquee Video on YouTube https://youtu.be/Hm8t5ilcBpo CH334F 4-port USB Hub Breakout https://www.adafruit.com/product/5997 MagTag 2.9in E-Ink https://www.adafruit.com/product/4800 Timelapse Tuesday: Knight cat By Sunshine3D_ https://makerworld.com/en/models/3400182-knight-cat https://youtu.be/wuyt0Iog544 Community Makes https://www.printables.com/model/1871547-threaded-heat-set-insert-press https://www.printables.com/model/1866307-midi-foot-pedal-esp32-s3-supermini-holder

This week @adafruit showcasing the monster eyes Pepper’s ghost guide, another look at Adafruit Marquee and checking out this week’s time lapse Tuesday model of a floating ghost. Pepper’s Ghost Monster Eye https://learn.adafruit.com/peppers-ghost-monster-eye Qualia ESP32-S3: https://www.adafruit.com/product/5800 2.1in Round TFT: https://www.adafruit.com/product/5792 Monster Eyes Guide: https://learn.adafruit.com/adafruit-monster-eyes MagTag 2.9in E-Ink https://www.adafruit.com/product/4800 Timelapse Tuesday: Floating Ghost Dog By O3D https://makerworld.com/en/models/3323936-floating-ghost-dog-halloween-tealight-holder https://youtu.be/adPp499s8eU Community Makes https://www.printables.com/make/3650553 https://www.printables.com/make/3650565 https://www.printables.com/make/3639403?comment_id=3639403

This week @adafruit Pedro published and showcased his IoT E-ink Meshtatstic project. Noe is prototyping a new project using Monster Eyes and round TFT displays. Timelapse this week features a print-in-place skull with spline. Learn Guide: https://learn.adafruit.com/meshfruit-message-board Project YouTube Video https://youtu.be/FxuyWbHRbRs 4.2 300x400 Tri-Color e-ink display https://www.adafruit.com/product/6382 Feather ESP32 S3 https://www.adafruit.com/product/5323 E-Ink Feather Friend https://www.adafruit.com/product/4446 Monster Eyes Guide https://learn.adafruit.com/adafruit-monster-eyes Timelapse Tuesday: Skull Spine By gobotoru https://makerworld.com/en/models/3256431-spine-ripper-articulated-skull-spine-fast-print https://youtu.be/Twa0unAdSaU

This week @adafruit Noe is publishing his Franky candy dispenser project. Pedro has more updates on the e-ink meshtastic project and a new time lapse of articulating extended fingers. Learn Guide https://learn.adafruit.com/franky-candy-dispenser YouTube Video https://youtube.com/shorts/yNbIKtg1oE4?feature=share Feather RP2040 PropMaker: https://www.adafruit.com/product/5768 LED Glasses Starter Kit https://www.adafruit.com/product/5255 4.2 300x400 Tri-Color e-ink display https://www.adafruit.com/product/6382 Feather ESP32 S3 https://www.adafruit.com/product/5323 HelTech Case https://makerworld.com/en/models/160873-h1-case-for-heltec-v3-running-meshtastic Timelapse Tuesday: Parametric Articulated Finger Extensions By ShugyoPrint https://makerworld.com/en/models/3114173-parametric-articulated-finger-extensions https://youtu.be/KKIErP7QzWA Community Makes https://www.printables.com/model/1839393-lab-carry-box-for-adafruit-circuit-playground-blue

This week @adafruit Pedro is back with progress on the e-ink display project. Noe is in the progress of writing up a guide for the Franky candy dispenser project. This weeks time lapse features a smiley stitched mask. Feather RP2040 PropMaker: https://www.adafruit.com/product/5768 LED Glasses Starter Kit https://www.adafruit.com/product/5255 Timelapse Tuesday: Smiley Stitched Mask By ONI.FORGE https://makerworld.com/en/models/1902039-smiley-tpu-stitched-fabric-horror-halloween-mask https://youtu.be/KXWCsn7SEzU

This week @adafruit special co-host Liz Clark will be joining Noe to discuss their latest collaboration, Franky Candy Dispenser. Chatting about work-in-progress projects, community makes and more. Feather RP2040 PropMaker: https://www.adafruit.com/product/5768 LED Glasses Starter Kit https://www.adafruit.com/product/5255 Timelapse Tuesday: Halloween Davy Jones Tentacles Mask By RALAR3D https://makerworld.com/en/models/1883397-halloween-davy-jones-tentacles-mask-flexi https://youtu.be/D7AbN_Utr_8

This week @adafruit Noe and Pedro are working on new projects. Pedro is designing an IoT e-ink project while Noe is working on a candy dispenser for the upcoming halloween season. Tricolor Eink 4.2in https://www.adafruit.com/product/6382 Feather ESP32-S3: https://www.adafruit.com/product/5477 Eink Feather Friend: https://www.adafruit.com/product/4446 RFM95W Lora Radio: https://www.adafruit.com/product/3072 Feather RP2040 PropMaker https://www.adafruit.com/product/5768 Timelapse Tuesday: Mewtwo Skull Mask By Deadmoon https://makerworld.com/en/models/3082934-mewtwo-skull-mask https://youtu.be/qK4nFKmKrE8

This week @adafruit It’s CircuitPython Day! Noe and Pedro will chat about what they’re working on and highlight some of their favorite projects in 2026. Adafruit Feather RP2350 with 8MB PSRAM: https://www.adafruit.com/product/6130 I2S Amplifier MAX98357A https://www.adafruit.com/product/3006 I2S MEMs Mic IC-43434: https://www.adafruit.com/product/6049 Tricolor Eink 4.2in https://www.adafruit.com/product/6382 Feather ESP32-S3 https://www.adafruit.com/product/5477 Eink Feather Friend https://www.adafruit.com/product/4446 RFM95W Lora Radio https://www.adafruit.com/product/3072 Timelapse Tuesday Momo Creepy smile mask By cforms https://makerworld.com/en/models/1839027-creepy-smile-horror-mask-2-wearable https://youtu.be/O5V6VCt1KOA

This week @adafruit Pedro wraps up the flight tracker with lunar transit features. Noe has a working prototype of the voicebox FX with code by Liz. This week’s timelapse features the infamous racoon Jimothy. Qualia ESP32-S3: https://www.adafruit.com/product/5800 2.1in TTL Round Display with Touch: https://www.adafruit.com/product/5792 Adafruit Feather RP2350 with 8MB PSRAM: https://www.adafruit.com/product/6130 I2S Amplifier MAX98357A https://www.adafruit.com/product/3006 I2S MEMs Mic IC-43434: https://www.adafruit.com/product/6049 Timelapse Tuesday Jimothy By NateStormArt https://makerworld.com/en/models/3069661-jimothy-running?from=search#profileId-3455550 https://youtu.be/xsAVBx88VrI

This week @adafruit Pedro continues his work on the flight tracker with lunar transit features. Noe is designing the enclosure for a voicebox with effects. This week’s timelapse features a pool noodle numchucks. Qualia ESP32-S3: https://www.adafruit.com/product/5800 2.1in TTL Round Display with Touch: https://www.adafruit.com/product/5792 Adafruit Feather RP2350 with 8MB PSRAM: https://www.adafruit.com/product/6130 I2S Amplifier MAX98357A https://www.adafruit.com/product/3006 I2S MEMs Mic IC-43434 https://www.adafruit.com/product/6049 Timelapse Tuesday Pool Noodle Numchucks By CompliantDesigns https://makerworld.com/en/models/1497093-pool-noodle-numchucks https://www.youtube.com/watch?v=hf8gYLe6R9Y Community Makes https://www.printables.com/make/3519285 https://www.printables.com/make/3521614 https://www.printables.com/model/1771557-adafruit-perma-proto-quarter-sized-breadboard-case https://www.thingiverse.com/make:1263796

This week @adafruit Pedro is working on a flight tracker with lunar transit features. Noe wraps up Liz Clark’s CircuitPython chiptune player. This week’s timelapse features a pool noodle sword inspired by Zelda video games. Adafruit Feather RP2350 with 8MB PSRAM: https://www.adafruit.com/product/6130 Adafruit 3.5" TFT FeatherWing V2: https://www.adafruit.com/product/3651 PCM5102 I2S DAC: https://www.adafruit.com/product/6250 Qualia ESP32-S3 https://www.adafruit.com/product/5800 2.1in TTL Round Display with Touch https://www.adafruit.com/product/5792 Timelapse Tuesday Pool Noodle Master Sword By Amedeo Makes https://makerworld.com/en/models/1513731-pool-noodle-master-sword-legend-of-zelda https://youtu.be/bV4MfPTq4ic

This week @adafruit we’re working on new projects. Noe has a working prototype for Liz Clark’s CircuitPython chiptune player while Pedro is working on a new project. This week’s timelapse features a diving penguin pool toy. Adafruit Feather RP2350 with 8MB PSRAM https://www.adafruit.com/product/6130 Adafruit 3.5" TFT FeatherWing V2 https://www.adafruit.com/product/3651 PCM5102 I2S DAC https://www.adafruit.com/product/6250 Timelapse Tuesday Diving Penguin By kim_kreations https://makerworld.com/en/models/2699668-penguin-diving-pool-toy https://youtu.be/5Utw9foeYsI

This week @adafruit we’re releasing the guide and video for the GPS compass. Starting a new project, a chiptune player using Feather RP2350 and TFT FeatherWing. This week’s timelapse features a toy boat powered by a balloon. Learn Guide https://learn.adafruit.com/minecraft-gps-compass Video https://youtu.be/8WSCJ9oADt4 Adafruit Feather RP2350 with 8MB PSRAM https://www.adafruit.com/product/6130 Adafruit 3.5" TFT FeatherWing V2 https://www.adafruit.com/product/3651 Adafruit LSM6DSOX + LIS3MDL 9-DoF IMU https://www.adafruit.com/product/4517 Adafruit PA1010D GPS https://www.adafruit.com/product/4415 Timelapse Tuesday Balloon Boat By jp.studio https://makerworld.com/en/models/2863788-balloon-boat https://youtu.be/Jps2p9y8EEE Community Makes https://www.printables.com/make/3490027 https://www.printables.com/make/3482411 https://www.printables.com/make/3475356 https://www.printables.com/make/3477206

This week @adafruit we’re releasing the guide and video for the Prop It Game. Making progress on our GPS compass. This week’s timelapse features a gliding manta ray. Prop It Guide: https://learn.adafruit.com/prop-it-game Prop It YouTube Video https://youtu.be/h9voRYuo8q0 Feather RP2040 Propmaker: https://www.adafruit.com/product/5768 Timelapse Tuesday Gliding Manta Ray By Armengol13 https://makerworld.com/en/models/2909692-gliding-manta-ray-just-drop-go https://youtu.be/Qx6eNKkmnH0 Community Makes https://www.printables.com/make/3475356 https://www.printables.com/make/3477206

This week @adafruit Noe and Pedro are back from their break. Catch up on our GPS compass device and Prop It handheld game. This week’s timelapse features the iconic Enderman from Minecraft. Feather RP2040 Propmaker: https://www.adafruit.com/product/5768 Alpanumeric LED Display https://www.adafruit.com/product/2158 3.5in FTF FeatherWing https://www.adafruit.com/product/3651 Adafruit Feather RP2350 with 8MB PSRAM https://www.adafruit.com/product/6130 Adafruit 3.5" TFT FeatherWing V2 https://www.adafruit.com/product/3651 Adafruit LSM6DSOX + LIS3MDL 9-DoF IMU https://www.adafruit.com/product/4517 Adafruit PA1010D GPS https://www.adafruit.com/product/4415 Timelapse Tuesday Enderman By PeWu https://makerworld.com/en/models/1952402-minecraft-enderman-model-kit https://youtu.be/sDtclneIbvc Community Makes https://www.printables.com/model/1744667-usb-chorded-keyset-pro-micro-version https://www.printables.com/model/1744095-ipad-mini-4th-and-5th-gen-sun-shade-case https://www.printables.com/model/1741542-case-for-rp2040-radio-fruit-adafruit-feather-rp204 https://www.printables.com/make/3448631 https://www.printables.com/model/1748875-20mm-watch-band-patterned