
Advertise on podcast: The Model Rocket Show
Rating
5from
This podcast has
20 episodes
Language
EnglishPublisher
TheRocketryShow.ComExplicit
No
Date created
2020/03/15
Latest episode
2026/07/06
Average duration
63 min.
Release period
156 days
Description
Do you love to fly low and mid power rockets or are you a beginner looking into model rocketry? If you answered “yes!” then this show is for you. The Model Rocketry Show is a bi-weekly podcast discussing model rocketry. With your host, The Rocket N00b, you’ll learn all about rocketry basics.
Unlock The Model Rocket Show podcast Email contact info,
Listeners & Audience details
Email contact information
Direct podcast contact details

Listeners
Audience numbers & engagement insights

Audience details
Podcast Insights

Podcast episodes
Check latest episodes from The Model Rocket Show podcast
(TRS #139) “A fun and Challenging Kit to build”
2026/07/06
This is a combined Model Rocket / The Rocketry Show podcast post.
The Rocket n00b joins us with his guest James Duffy, and they will talk about their experiences building a fun and challenging rocket kit that they enjoyed, The Estes Souyz Pro series kit! James and N00b take a few moments to share with you some tips for your build version.
CG Updates us on his upcoming test launch, and we talk rockets, of course!
Mentioned in this episode:
eRockets
Ep 17: Chemical Safety thoughts in Model Rocket Building
2024/11/19
As you get started in Hobby Rocketry, It's important to be mindful of the chemicals you use in constructing & Painting your rockets.
We explore this area of the hobby in this episode with Daniel the Rocket N00b, and his guest Ray.
We take a deep dive into things to keep in mind, and simple precautions to take while using:
Epoxy - Long term exposure both by skin contact and breathing in fumes could create problems for people. We share thoughts on some precautions to take.
Paints - Obviously, we can all tell by the smell that there is probably not good stuff to breathe in there. We discus
Building Materials - Some building materials can cause short term discomfort and more serious issues over time. Take precautions to protect yourself from both.
Mentioned in this episode:
eRockets Featured Ad
EP16: Why do our rockets turn into the wind?
2024/10/21
In this episode, The Rocet n00b teams up with his colleagues from The Rocketry Show to interview Tom Fetter about why our rockets turn into the wind?
Tom has done a ton of research on the topic, and was excited to join us to share!
Mentioned in this episode:
eRockets Featured Ad
Open Rocket Overview with Neil Weinstock
2022/11/22
You’ve found Episode 15 of the Model Rocket Show! This time around, are talking to Neil Weinstock from the Open Rocket project about this useful software tool.
Neil Weinstock is one of the developers working on open Rocket, which is free open source model, rocket and high power rocket design and simulation software. Many folks find that it’s also a great tool for designing paint schemes too!
We’ll dive into what it is, where you can get it, and about some exciting new updates.
If you stick around til the end of the show, The N00b has a little something for you.
John Boren Returns!
2022/09/26
John Boren returns to update us on his world, and on his world at Estes, now under new management!
It was an enjoyable discussion, and we hope you enjoy it!
Mike Nowak and James Duffy - FAI Competition Rocketry
2022/02/21
James Duffy, left, and Mike Nowak, right, at the opening ceremonies of the European Space Modeling Competition in Ukraine, 2015
Here’s an episode we recorded a while back, and since it’s been a hot topic recently due to virtual NARCON, we’re dropping it now.
We chat with Mike Nowak and James Duffy – two skilled rocket builders who’ve been competing on the American team in international rocketry competitions for years. FAI – the Fédération Aéronautique Internationale – is the world governing body for air sports, including model rocketry. The International Championships for Spacemodeling are frequently held in Europe, and until next year, have never been held in the United States.
That’s about to change, as the Internats will be held in the U.S. in 2023, giving Americans the opportunity to fly for the national team without the often challenging aspects of getting themselves – and their fragile model rockets – overseas.
We talk with Mike and James about what it takes to build good competition scale models, what competing in the internationals is like, and much more, on this episode of The Model Rocket Show.
In other news, the N00b has opened an Etsy shop of rocketry-related t-shirts and coffee mugs. You can find it by clicking here.
State of the show, and a deep dive into The Model Rocket Safety Code
2022/01/03
We’re baaack!
Daniel The Rocket n00b gives the update what’s going on in his world. and the state of the program.
Then Gheem and Jesse join forces to do a deep dive on The Model Rocket Safety Code.
This is a perfect episode to share with someone just getting into the hobby, and to enjoy as a refresher maybe for yourself!
Frank Burke and His RC Rocket Gliders
2021/08/21
Model Rocket Guy Jesse U (left) with our guest, Frank Burke
In this episode, Model Rocket Guy Jesse U of The Rocketry Show sits in for the N00b. Jesse talks with Frank Burke, maker of a number of amazing, large, radio controlled rocket gliders.
Frank uses AeroTech’s long burning composite motors to loft these models vertically, and then controls their long, gliding descent with the RC controller he’s holding.
As Frank discusses in the episode, it’s not as hard to get started with these rocket gliders as you might think, if you’re a traditional 3-fins and a nose cone kind of rocketeer. In fact, Frank can help, as he sells the kits for these fabulous birds at his website, Dyna Soar Rocketry (click here to visit the site).
On his site, Frank has most of what you need to get started, including the right motors, instructional videos, and a radio settings page.
To see the rockets discussed in the latter half of the episode, click on the link to Dyna Soar rocketry and view the pictures.
Thanks to Frank for joining us on The Model Rocket Show, and thanks to Jesse for stepping in for the N00b!
Randy Boadway - eRockets.biz and Semroc
2021/07/01
Our guest this week is our esteemed sponsor – Randy Boadway, owner of eRockets.biz and producer of Semroc kits and parts.
We have a great conversation, lots of fun, and Randy even tells me what the “best wood glue in the world” is!
Randy has one of the best jobs in the world – owner of the world’s largest supplier or model rocket kits and parts. Here’s a picture from his office, featuring the Semroc Mars Lander.
As a member of the Wright Stuff Rocketeers, Randy hosts build nights once a month at eRockets. And during the time of pandemic, lots of people have been able to join via Zoom, making tours more accessible, even to people who live far away.
Thanks, Randy!
Chris Michielssen - Model Rocket Building!
2021/05/15
Our guest, Chris Michielssen’s fantastic blog
I found Chris Michielssen’s blog, Model Rocket Building (which you can visit by CLICKING HERE) shortly after I got started in this hobby back in 2014, and in it I found a wealth of knowledge. Chris is a real craftsman. His blog lays out builds, usually from start to finish, and is full of tips and advice to get good looking builds. Just by visiting Model Rocket Building on a daily basis, my own builds quickly went from rough, beginner’s models to much more polished looking, because I was able to easily adopt some of his building techniques.
If you haven’t checked it out, you really ought to be reading Chris’ blog. Especially if you’re building a more challenging model – say, a Saturn V or Little Joe kit – Chris has probably already tackled it, and has hints for good building as well as traps to look out for.
In addition, Chris has his own line of model rockets, unique kits called “Odd’l Rockets,” featuring flying pigs, little green aliens, and some pretty cool looking fighter jet style kits, as well as some useful accessories and motor mount upgrades (thicker tubes for longer lasting and sturdier rockets). The website is HERE, and if you’d like to order some kits or accessories, you can do so at our show sponsor, eRockets.biz, by clicking HERE.
I first met Chris in person at NARCON 2019, which feels like ages ago, with all that’s gone on since then. He was such a great guy to talk to, and I’m thrilled he joined me on the podcast.
Detail of Chris’ Dr. Zooch Mercury Redstone – a very challenging build
By the way, if you’re wondering what happened to Field Notes 2020, Part 2… Well, there was just too much recorded material. Editing was taking far too long. This was supposed to be two nice little episodes for last Christmas and New Years, and here we are nearly halfway through 2021. The project was more ambitious for the time I had to devote to it.
But there are some nice little moments in there, I think, so look for bits of field recordings as Easter eggs at the end of future episodes.
The top two pictures are from Chris’ blog, and used with permission.
Field Notes 2020: Part 1
2021/03/07
2020 was a tough year. Rocketry really helped some of us get through it.
I took a recorder along to almost every launch I went to, and the result is this 2-part series, Field Notes 2020.
Because of the uncertainty, I wasn’t sure I’d be able to fly at all this past year. The NAR prohibited organized club launches for a while, due to the COVID-19 pandemic.
Eventually, I made it out to some casual, 2-3 person launches. And then the clubs were able to fly again.
Despite the difficulties, I might have had more actual flights this year. At club launches, I spend a lot of time chatting with people, and don’t always fly as much as I mean to. Informal launches are where I fly much more frequently in fewer hours’ time.
I introduced Little N00b to flying this year. He seemed to enjoy it, for a bit, until the excitement became a little too much for him. Two A-motor flights to start the year – it was better than nothing.
I finished a few new builds early in the summer, and they looked quite nice. I get nervous flying a model rocket when it turns out too nice, but they’re made to fly, so I eventually make myself do it (when the wind isn’t too bad!).
I flew my first Semroc models, the Cherokee D and Bandit, two “Retro-Repro” kits from earlier Estes designs.
When the club got back together, I wasn’t sure if I was more excited about the rocketry, or just seeing other people again! I took along my new camera and tried to capture some launch photos. I didn’t really get the hang of this at first, and it would be later in the season when I would get my first decent liftoff shots.
But I did get plenty of what I call “rocket boudoir photos,” rockets on the ground with the chutes out after a safe recovery.
I spent a lot of time after launches taking pictures. I didn’t always find the rocket I was looking for, but I got some nice shots of flowers and bees. And other peoples’ old, lost rockets.
It turned out to be a rather nice summer with mostly good weather. I hope you enjoy the episode.
Season 2 Episode 1 teaser
2021/01/25
The N00b has hours of audio to edit.
I took my recorder along to document (almost) every single launch I went to this year. There weren’t as many formal launches as we had planned, obviously, but I still managed to fly quite a lot.
A big two-part episode is coming – Field Notes 2020. But since there’s so much audio to wade through, here’s a short episode of a few highlights you’ll hear in the full length episodes, a teaser episode.
Workshop! With The Rocketry Show Guys
2020/12/07
After a hiatus (you know, it’s 2020…), we’re back with The Model Rocket Show!
This episode is a classic “workshop” episode fans of The Rocketry Show have come to enjoy – and the N00b is joined by Jesse and Gheem from The Rocketry Show! CG is there, too, but just listening quietly in the background (you know how Gheem and the N00b can ramble on…)
In the first half of the show, we answer listener questions, including one from a Patreon patron which slipped through the N00b’s email for a while (sorry about that, Les!).
After our break, we get to talking shop with a fun, longwinded conversation which culminates in… MURDER!!!
…of the N00b’s Mercury Redstone escape tower.
A lot of rocketeers have been frustrated by a build over the decades, and sometimes smashing a piece which is getting your goat feels like the only solution…
James Duffy - Scale Modeling, FAI, and more!
2020/09/07
In this episode, we chat with James Duffy, an accomplished scale modeler and competitor in FAI international model rocketry competitions.
James' main specialties in scale modeling are the Bumper WAC - an early American two-stage sounding rocket consisting of a captured German V-2 first stage with a WAC Corporal cobbled on top as a second stage...
Bumper 8 lifting off from Cape Canaveral
James Duffy's scale Bumper WAC
...and the Little Joe test vehicle, which NASA used during Project Mercury to test the launch escape system (the Little Joe II was later used for the same purposes for Project Apollo) and heat shield.
One impressive model James has flown in international competitions is his 1/12 scale Little Joe.
We discuss scale modeling and get his advice, and James tells us about FAI international model rocketry competitions. The American team has made a bid to hold the World Championships here in the United States in 2023. This would be the first time the international fly-offs will have been held in the U.S. since 1992.
Also, check out Spacemonkey Models (CLICK HERE), James' company selling the most detailed scale model V-2 available anywhere. It's a static model (which means it doesn't fly), but it can be converted to a flying model rocket with a conversion kit sold by Apogee Components (CLICK HERE to get it). You can also buy the Spacemonkey V-2 itself from Apogee.
I have one of the Spacemonkey kits, and it's a gorgeous thing. James has a thorough video tutorial series for building the V-2 on his YouTube channel. CLICK HERE to go to the playlist.
The kit comes with four different decal sets, so you have what you need to build one of four different iterations of the V-2, and the decals fit almost perfectly to the Estes V-2, so with a Spacemonkey kit you have the decals to build three more flying models!
#5 - Gary Rosenfield of AeroTech and Quest Aerospace
2020/07/20
In this episode, we talk with Gary Rosenfield, who founded AeroTech Consumer Aerospace in 1982. AeroTech makes ammonium perchlorate composite propellant motors, often referred to as simply "composite motors." This distinguishes them from the traditional model rocket motors, which use black powder propellant.
AeroTech is known for making high power motors, up to the enormous M, N, and O impulse motors. But they also make low and mid power motors for model rocketeers.
A small selection of AeroTech reloadable motor casings
Around 2014, AeroTech merged with Quest Aerospace, a model rocket company which manufactured kits and black powder motors. The motors were rather similar to the Estes black powder motors, but included the much-loved Q2G2 igniters.
An Estes C6-5 on left, with a starter. An old Quest C6-5 on right, with the Q2G2 igniter.
Q2G2's were fast igniters. That is, they required less amperage to fire, and with a small black pyrogen tip, they were great for igniting black powder clusters - configurations of two or more motors.
With clusters, it's important to have all motors ignite simultaneously, or the rocket could leave the pad with one or more motors unlit. This can sometimes result in a less-than-straight flight trajectory, and it's what makes clustering a fun challenge!
Following an accident in a port in China, through which Quest's old motors were exported to the U.S., Quest motors and igniters became unavailable for a long time.
Bill Stine, who had founded Quest, challenged Gary to create an A-impulse motor with composite propellant.
Gary accepted the challenge, and after a long period of development and experimentation, the new Quest composite motors became a reality.
Dubbed "Q-Jets," these little 18mm motors are the same length and diameter as standard A/B/C model rocket motors, but because they contain the more energetic AP composite propellant, Quest/AeroTech can get a D powered motor into the smaller sized casing.
A Quest Q-Jet D motor, top, is the same size as an Estes C engine, bottom. The narrow part sticking out on the right of the Q-Jet is the ejection charge well.
This is because AP propellant has a higher specific impulse than black powder propellant.
Q-Jets are fast, fun, zippy motors. And AeroTech has lots of different AP motors for rockets of all sizes.
You can get Q-Jet's from our sponsor, eRockets.biz, by clicking here.
And you can get AeroTech motors from eRockets by clicking here.
And, hey, if you appreciate eRockets sponsoring The Model Rocket Show, let owner Randy know when you place your order! I'm sure he'd love to hear that his support is appreciated.
Podcast reviews
Read The Model Rocket Show podcast reviews
rocketaholic 2020/12/07
Terrific podcasts
The shows are informative and enjoyable to listen to while working on rocket hobby projects.
Gheem1 2020/09/07
Great Show!!!
For those that are into rocketry but not sure where to start, this is the place! The production value is professional, the topics fresh, and the disc...
Russ Parrish 2020/09/02
Wonderful show!
Very happy to see a new show taking off. The content has been a great companion to The Rocketry Show. Looking forward to many more episodes!
geocacher13 2020/04/09
Great!
Thank you for doing this. I have just listened to the first episode and I am hooked. Keep up the great work. I cannot wait to see what this show has t...
29348& 2020/04/01
Amazing!
Amazing! That’s all there really is to say.
Podcast sponsorship advertising
Start advertising on The Model Rocket Show relevant audience podcasts
You may also like to advertise on these Podcasts

4.8219787
Imperfect Action
Steph Taylor

4.727630592
This Past Weekend w/ Theo Von
Theo Von

4.713049379
The Tim Dillon Show
The Tim Dillon Show

4.116091470
The Tucker Carlson Show
Tucker Carlson Network

4.828110458
Huberman Lab
Scicomm Media

4.240683
To Be The Man
Podcast Heat | Cumulus Podcast Network

4.41511782000
The Ben Shapiro Show
The Daily Wire

4.2155648
TENNIS.com Podcast
TENNIS.com Podcast/Tennis Channel Podcast Network

4.510879779
The Joe Budden Podcast
The Joe Budden Network

4.611699506
The Bulwark Podcast
The Bulwark