Advertise on podcast: Today in Manufacturing

The Today in Manufacturing Podcast is brought to you by the editors of Manufacturing.net and Industrial Equipment News (IEN). This week's sponsor is Epicor. If you ask any technology expert, they’ll say the opportunities for AI are vast, but many manufacturers feel they are still out of reach. Meanwhile, other manufacturers are already using it to cut waste and boost design & production efficiency, sharpening their competitive edge. Our latest video podcast, AI in Manufacturing: Handle with Care, answers the questions holding businesses -- like yours -- back: Where does AI deliver the most value? Which applications carry the highest – and lowest – risk? And what will it really cost? Download the podcast right now. Every week, we cover the three biggest stories in manufacturing, and the implications they have on the industry moving forward. This week: - Ford Factory Hires Hawk to Fight Off Pigeons - New Drone Falls From Sky Like Maple Seed, Then Sails Like Boat  - Figure Trained Its Humanoid Robots to Jump Into Molten Steel In Case You Missed It  - Your Next Vulnerability May Be an Exhausted Employee  - Kawasaki Made a Robot Cat to Care for the Elderly  - Your Home’s Foundation Could Soon Power the Entire Building Please make sure to like, subscribe and share the podcast. And to email the podcast, you can reach any of us at Anna, Jeff or [email protected], with “Email the Podcast” in the subject line. Subscribe to our daily and weekly newsletters.

Editor's note: Download and listen to the audio version below and click here to subscribe to the Today in Manufacturing podcast. The Today in Manufacturing Podcast is brought to you by the editors of Manufacturing.net and Industrial Equipment News (IEN). This week's episode is brought to you by GAINS Systems.  Digital transformation is more than simply upgrading your IT systems and hoping for the best. Manufacturers are being tasked to use the latest and greatest AI solutions — a toolkit proven to improve the efficiency of existing processes and procedures. And while this emerging field requires a little experimentation, experts say there are ways to implement AI that are more trial and less error. In this video, "Practical AI for Real Results," you’ll learn how to build the momentum you need to move forward faster with AI: which choices drive the biggest results and how each decision has ripple effects across your business. Watch it right now.  Every week, we cover the three biggest stories in manufacturing, and the implications they have on the industry moving forward. This week: - Workers Hospitalized After Chemical Leak at Purina Dog Food Plant - It Took At Least 16 Fire Departments and 2 Million Gallons of Water to Put Out Plastics Plant Blaze in Michigan - Pentagon Investigates 'Shipment Issue' After China Obtains Parts From F-35 Stealth Fighter Jet In Case You Missed It - World’s First Self-Balancing Exoskeleton Lets Wheelchair Users Walk Upright - Caterpillar Commits $1B to Expand Compact Machine Manufacturing -Criminal Conspiracy To Steal Used Cooking Oil Shows How Trash Can Become Treasure Please make sure to like, subscribe and share the podcast. And to email the podcast, you can reach any of us at Anna, Jeff or [email protected], with “Email the Podcast” in the subject line. Subscribe to our daily and weekly newsletters.

Editor's note: Download and listen to the audio version below and click here to subscribe to the Today in Manufacturing podcast. The Today in Manufacturing Podcast is brought to you by the editors of Manufacturing.net and Industrial Equipment News (IEN). This episode is brought to you by Siemens. Small and medium-sized manufacturers encounter the same industry-wide pressures as large manufacturers: rising costs, labor shortages, and growing operational complexity. But conventional digital transformation programs are often out of reach for smaller manufacturers due to budget, time, and skills constraints. This paper from ARC Advisory Group, "How Siemens Is Positioning Xcelerator for Small-Medium Manufacturers," outlines a more practical way for these manufacturers to do more with less and see results faster. Download "How Siemens Is Positioning Xcelerator for Small-Medium Manufacturers" right now.  Every week, we cover the three biggest stories in manufacturing, and the implications they have on the industry moving forward. This week: - America's Transformer Crisis Is a Sign of What's Coming - F-150 Gas Tanks Could Detach in Latest Ford Recall Filing - Police Bust $3.5M Underground Plant With 70-Year-Old Vinyl Presses In Case You Missed It - Pirelli Bets $1.2B to Expand U.S. Plant With Autonomous Modular Robotics - Bacteria Evolved to Survive and Eat Industrial Pollution - Manufacturers Are Moving Past Pilots and Scaling AI Deployments  Please make sure to like, subscribe and share the podcast. And to email the podcast, you can reach any of us at Anna, Jeff or [email protected], with “Email the Podcast” in the subject line. Subscribe to our daily and weekly newsletters.

The Today in Manufacturing Podcast is brought to you by the editors of Manufacturing.net and Industrial Equipment News (IEN). This episode is brought to you by Siemens. Small and medium-sized manufacturers encounter the same industry-wide pressures as large manufacturers: rising costs, labor shortages, and growing operational complexity. But conventional digital transformation programs are often out of reach for smaller manufacturers due to budget, time, and skills constraints. This paper from ARC Advisory Group, "How Siemens Is Positioning Xcelerator for Small-Medium Manufacturers," outlines a more practical way for these manufacturers to do more with less and see results faster. Download "How Siemens Is Positioning Xcelerator for Small-Medium Manufacturers" right now.  Every week, we cover the three biggest stories in manufacturing, and the implications they have on the industry moving forward. This week: - Cyborg Cockroach Paramedics Are Here to Save You - Samson Says It's Building a U.S. Factory for the Switchblade Flying Car - Ford Announces Another $1B U.S. Investment 2 Days After Being 'Blindsided' by DOT In Case You Missed It - Scientists Turn Dairy Waste into Fuel - Gen Z in Manufacturing: Why Young Engineers Are More Skeptical of AI Than Older Generations - Students to Transform 1976 Ford F-350 Into 'America’s Ultimate Trades Toolbox' for Northern Tool Challenge Please make sure to like, subscribe and share the podcast. And to email the podcast, you can reach any of us at Anna, Nolan or [email protected], with “Email the Podcast” in the subject line. Subscribe to our daily and weekly newsletters.

Editor's note: Download and listen to the audio version below and click here to subscribe to the Today in Manufacturing podcast. The Today in Manufacturing Podcast is brought to you by the editors of Manufacturing.net and Industrial Equipment News (IEN). This episode is brought to you by Siemens. Small and medium-sized manufacturers encounter the same industry-wide pressures as large manufacturers: rising costs, labor shortages, and growing operational complexity. But conventional digital transformation programs are often out of reach for smaller manufacturers due to budget, time, and skills constraints. This paper from ARC Advisory Group, "How Siemens Is Positioning Xcelerator for Small-Medium Manufacturers," outlines a more practical way for these manufacturers to do more with less and see results faster. Download "How Siemens Is Positioning Xcelerator for Small-Medium Manufacturers" right now.  Every week, we cover the three biggest stories in manufacturing, and the implications they have on the industry moving forward. This week: - New Metal Foam Could Make Car Crashes Safer - Volkswagen to Cut 50,000 More Jobs and Close 4 Plants - Northern Tool Reshores from Mexico, ‘Insources’ to Improve Quality In Case You Missed It - New Device Could Make Sleep Studies Much Easier for Patients - Manufacturers Pay Price When Factory Workers Miss Critical Updates - 'Living Character' Startup Spins Out of Boston Dynamics to Bring the World Fluffy Purple Robot Dogs Please make sure to like, subscribe and share the podcast. And to email the podcast, you can reach any of us at Jeff, Ben or [email protected], with “Email the Podcast” in the subject line. Subscribe to our daily and weekly newsletters.

Editor's note: Download and listen to the audio version below and click here to subscribe to the Today in Manufacturing podcast. The Today in Manufacturing Podcast is brought to you by the editors of Manufacturing.net and Industrial Equipment News (IEN). This week's episode is brought to you by Opswat. AI is moving from pilots into manufacturing operations, helping teams improve productivity, quality and scale. But as more files, devices, suppliers and OT data flows become connected, cyber risk expands in an industry already targeted more than any other. Watch this new on-demand webinar, "Manufacturing Cybersecurity in the Age of AI," to learn how to protect critical operations in the age of AI. Every week, we cover the three biggest stories in manufacturing, and the implications they have on the industry moving forward. This week: - 40,000 Pounds of Beer Swiped From California Distribution Center - SpaceX Pulls Off Biggest Salvage Operation Yet - Deadly THC Facility Explosion Leads to Murder Charge for Owner In Case You Missed It - This Cookies is Made From Plastic Bottles - Ice Cream Cones, the Ingenious Invention of American Immigrants - DARPA Gives Northrop $7M to Make Diamond-Cooled Microchips for the Military Please make sure to like, subscribe and share the podcast. And to email the podcast, you can reach any of us at Jeff, Anna or [email protected], with “Email the Podcast” in the subject line. Subscribe to our daily and weekly newsletters.

The Today in Manufacturing Podcast is brought to you by the editors of Manufacturing.net and Industrial Equipment News (IEN). This episode is brought to you by Siemens. Small and medium-sized manufacturers encounter the same industry-wide pressures as large manufacturers: rising costs, labor shortages, and growing operational complexity. But conventional digital transformation programs are often out of reach for smaller manufacturers due to budget, time, and skills constraints. This paper from ARC Advisory Group, "How Siemens Is Positioning Xcelerator for Small-Medium Manufacturers," outlines a more practical way for these manufacturers to do more with less and see results faster. Download "How Siemens Is Positioning Xcelerator for Small-Medium Manufacturers" right now.  Every week, we cover the three biggest stories in manufacturing, and the implications they have on the industry moving forward. This week: - Freedom and Glory Featured in New Episode of 'Made in America' - Ohio Manufacturer Files Defamation Lawsuit Over 1-Star Google Review - Illegal Cookie Factory Caught Substituting Charcoal for Cocoa In Case You Missed It - Chinese Humanoid Robots Smash Human Records in Sprint, High Jump - Yellow School Bus Faces New Reality - SpaceX to Build World's Largest Spaceport in Louisiana New Segment: Executive Q&A with Michael J. DeVoney, OptiCrib Michael J. DeVoney is the executive vice president of OptiCrib. DeVoney flew to Madison, Wisconsin, last week to be in studio to discuss physical AI warehouse automation, "grab and go MRO," critical spares management and Amazon's new robotics manufacturing facility in Austin—as well as fears over the ecommerce giant entering the B2B industrial market.   Please make sure to like, subscribe and share the podcast. And to email the podcast, you can reach any of us at Jeff, Anna or [email protected], with “Email the Podcast” in the subject line. Subscribe to our daily and weekly newsletters.

The Today in Manufacturing Podcast is brought to you by the editors of Manufacturing.net and Industrial Equipment News (IEN). This episode is brought to you by Siemens. Small and medium-sized manufacturers encounter the same industry-wide pressures as large manufacturers: rising costs, labor shortages, and growing operational complexity. But conventional digital transformation programs are often out of reach for smaller manufacturers due to budget, time, and skills constraints. This paper from ARC Advisory Group, "How Siemens Is Positioning Xcelerator for Small-Medium Manufacturers," outlines a more practical way for these manufacturers to do more with less and see results faster. Download "How Siemens Is Positioning Xcelerator for Small-Medium Manufacturers" right now.  Every week, we cover the three biggest stories in manufacturing, and the implications they have on the industry moving forward. This week: - 5 Notable Cars That Won't Be Around Next Year - Engine Debris to Blame for Broken Boeing Window That Sucked Out Passenger - Tyson to Close 2 Facilities, Cut 3,200 Jobs In Case You Missed It - AI Companies Look to Ocean as Place to Put More Data Centers - Meat Processor Accused of Dumping Animal Blood, Waste Into Nearby Waters - How UAV Technology Can Help Combat the Growing Cargo Theft Crisis Please make sure to like, subscribe and share the podcast. And to email the podcast, you can reach any of us at Andy, Nolan or [email protected], with “Email the Podcast” in the subject line. Subscribe to our daily and weekly newsletters.

The Today in Manufacturing Podcast is brought to you by the editors of Manufacturing.net and Industrial Equipment News (IEN). Sponsor: Is Your Manufacturing SMB Ready for the Digital Revolution? SMBs need to understand where their priorities lie. For about ten years, there has been a major push for businesses to get on board with an evolving slate of digital tools, and for good reason: according to KPMG, 59% of businesses who undertook digital transformation strategies saw profits grow by 11% or more.  But as we know, not all manufacturing businesses are created alike. Many experts point to the need for small and medium sized manufacturing businesses to look carefully at the unique requirements necessary for success. In this new whitepaper recap, IEN Editors David Mantey and Anna Wells help manufacturing SMBs understand where their priorities should lie when assessing the best path towards a digital transformation win. Watch the recap right now.  https://www.ien.com/formstack/is_your_manufacturing_smb_ready_for_the_digital_revolution_?utm_source=podcast Every week, we cover the three biggest stories in manufacturing, and the implications they have on the industry moving forward. This week: GM Exits Joint Venture for $3.5B EV Battery Plant https://www.ien.com/22972203 Samsung SDI recently acquired General Motors’ stake in the SynergyCells joint venture. SpaceX Picks Texas Home for Massive, Multi-Billion-Dollar Terafab https://www.ien.com/22972037 Last week, Texas Gov. Greg Abbott, Tesla and SpaceX announced that Grimes County will be the site of Terafab, a massive vertically-integrated semiconductor fabrication plant. Yamaha to End U.S. Side-by-Side Production https://www.ien.com/22971933 Yamaha Motor recently announced some major structural reforms to its outdoor land vehicle (OLV) business, which includes ATVs, ROVs and golf cars. In Case You Missed It Kimberly-Clark Picks Arizona for $100M Pilot Project https://www.ien.com/22972026 This low-water plant could be transformative. Milwaukee Tool Thief Gets 5 Years https://www.ien.com/operations/video/22972080/milwaukee-tool-thief-gets-5-years Last year, an employee at Milwaukee Tool was arrested for stealing more than $1 million in tools from the Wisconsin tool maker. Small Implant Can Deliver Cancer-targeting Light Directly Inside the Body  https://www.medicaldesigndevelopment.com/22972364 It could make photodynamic therapy more effective against internal cancers. #Manufacturing #ManufacturingNews #TodayInManufacturing #ManufacturingPodcast #EV #ElectricVehicles #Semiconductors #ChipManufacturing #SpaceX #Tesla #SupplyChain #AmericanManufacturing #FactoryNews

The Today in Manufacturing Podcast is brought to you by the editors of Manufacturing.net and Industrial Equipment News (IEN). Have you ever tried changing your tires at 100 MPH? This week's episode is brought to you by Epicor and a new podcast about how to win a  manufacturing race that never stops. Pressured by constant disruption, workforce challenges, and increasing operational complexity, manufacturing frontlines must operate like a Formula 1 pit crew to win — moving with speed, precision, and consistency. In this new podcast, Epicor’s Thom Smith offers practical strategies and real examples of how high performers persevere through intense change and competition. Watch and listen to "Changing Tires at 100 MPH" right now. Every week, we cover the three biggest stories in manufacturing, and the implications they have on the industry moving forward. This week: - 117-Year-Old Candy Company to Shutter Factory - Ohio Aerospace Plant Files for Bankruptcy - Rotten Fish Sauce That Has Long Stunk Up a Small Canadian Town Is Finally Being Removed In Case You Missed It - The Passwords Most Likely to be Breached - John Deere, UAW ‘Half a Billion Dollars’ Apart in Contract Extension Clash - The Tesla Salvage Boom: What Happens to High-Tech Cars After a Total Loss  Please make sure to like, subscribe and share the podcast. And to email the podcast, you can reach any of us at Jeff, Anna or [email protected], with “Email the Podcast” in the subject line. Subscribe to our daily and weekly newsletters.

The Today in Manufacturing Podcast is brought to you by the editors of Manufacturing.net and Industrial Equipment News (IEN). This episode is brought to you by Oracle NetSuite. For many businesses today, waiting to modernize your ERP may seem like the safe choice—but hidden costs can quickly add up. Every delay brings more inefficiencies and missed opportunities for innovation, while competitors who modernize gain an ever-growing advantage. In this guide, you’ll discover: The real price of waiting: How outdated systems lead to hidden costs and limit your growth potential.The risk of falling behind: What’s lost by delaying ERP modernization, and how early adopters gain a competitive edge.The modern ERP advantage: How NetSuite’s AI-powered features streamline operations and enable smarter, faster business decisions.Download, "The Hidden Costs of Standing Still," to learn how timely ERP modernization drives faster growth, sharper insights, and long-term competitive success. Every week, we cover the three biggest stories in manufacturing, and the implications they have on the industry moving forward. This week: - Seattle Cheesemaker Looks to Save Shuttered Wisconsin Facility - Mars to Shutter U.S. Headquarters, Cut Over 300 Jobs - Ford Plant Workers Fired for Alleged Snack Theft In Case You Missed It - Ford Helps Establish Alliance for America’s Skilled Trades - U.S. Bans Foreign-Made Humanoid Robots - 400-Year-Old Bell Foundry Adds Modern Tech to Keep Casting Process Alive Please make sure to like, subscribe and share the podcast. And to email the podcast, you can reach any of us at Jeff, Anna or [email protected], with “Email the Podcast” in the subject line. Subscribe to our daily and weekly newsletters.

Every week, we cover the three biggest stories in manufacturing, and the implications they have on the industry moving forward. This week: New Balance May Donate Shuttered Factory to the Town it Vacated About two years ago, New Balance announced plans to close its plant in Norridgewock, Maine. The move surprised pretty much everyone because the shoemaker is known for its U.S.-based manufacturing footprint. Ammo Factory Fails to Produce Any Shells After $469M Army Investment After sending many, many shells to Ukraine, the Army tasked General Dynamics and its existing ammunition plant in Mesquite, Texas, with manufacturing 30,000 M795 High Explosive 155 mm shells each month by October 2025. But a new report said the plant hasn't produced a single shell in two years of operation. Northwestern Engineers Made a ‘Phantom’ Drone That Vanishes in Plain Sight Engineers at Northwestern University have created a drone that appears to vanish in plain sight after it takes flight. The Phantom Twist is a drone that uses a concept called "motion blur" — the effect that makes it seemingly impossible to see fast-spinning blades on fans or Road Runner's legs. In Case You Missed It Pairs of Glasses Are Boosting Productivity in Some Garment Factories Operators who received reading glasses also made fewer errors. 3D-Printed, Patient-Specific Contact Lenses in Just 20 Minutes It uses a newly developed silicone material. TRISO-X Plots Massive Advanced Nuclear Fuel Expansion in Tennessee Last week, TRISO-X announced tentative plans to create some 1,140 new jobs in Oak Ridge, Tennessee. Please make sure to like, subscribe and share the podcast. And to email the podcast, you can reach any of us at Jeff, Anna or [email protected], with “Email the Podcast” in the subject line. Subscribe to our daily and weekly newsletters.

The Today in Manufacturing Podcast is brought to you by the editors of Manufacturing.net and Industrial Equipment News (IEN). This week's episode is brought to you by Fortinet, and the new point of view, Modern Manufacturing Needs a Clearer View of Cyber Risk. Modern manufacturing runs on connectivity, but that same connectivity means a cyber incident rarely stays contained to one system or site. It can move across IT, OT, suppliers, and operational processes, putting physical production at risk. This Fortinet POV breaks down the four barriers (competency, capability, capacity, and complexity) keeping manufacturers from truly understanding their risk, and shows why operational visibility, not just investment, is the key to turning awareness into action. With manufacturing representing the world's most-targeted industry for cyberattacks, and only 14 percent of organizations reporting full OT visibility, downloading this POV will empower your organization with a clearer view of your environment and help you prioritize, protect, and build resilience on the plant floor. Download, "Modern Manufacturing Needs a Clearer View of Cyber Risk," right now. Every week, we cover the three biggest stories in manufacturing, and the implications they have on the industry moving forward. This week: - Butter Maker Smooths Production Gaps with Flex Work Option That Lets Workers Pick Hours - Volkswagen Plans to Kill Off Half of Its Models - Harley-Davidson's Credit Rating Downgraded to Junk Status by S&P In Case You Missed It - Toyota-Backed Robotics Startup to Take On 'Hard-to-Automate' Tasks in Factories - Fujitsu, Leading Robotics Companies to Use Nvidia Tech in 'Physical AI' - Sony Retraining Workers After Scrapping PlayStation Discs  Please make sure to like, subscribe and share the podcast. And to email the podcast, you can reach any of us at Jeff, Anna or [email protected], with “Email the Podcast” in the subject line. Subscribe to our daily and weekly newsletters.

The Today in Manufacturing Podcast is brought to you by the editors of Manufacturing.net and Industrial Equipment News (IEN). This week's episode is brought to you by QAD Redzone. Did you know that only 5% of manufacturers are winning with AI? Well, here's how they're doing it. Recently, IEN's Executive Editor Anna Wells and QAD's Stephen Dombroski discussed how winning businesses approached AI implementation. In this new webinar, "From Reactive to Ready," now available on demand, you'll learn. Where AI and agentic AI are delivering real operational value todayA practical framework for AI modernization in industrial manufacturingHow ERP is evolving into a real-time system of actionDownload "From Reactive to Ready," right now. Every week, we cover the three biggest stories in manufacturing, and the implications they have on the industry moving forward. This week: - Missing Cargo Plane Sparks Massive Sea Search - Major Ford Recall Causes Two Alleged 'Emotional Injuries' - Polestar Banned from Selling Vehicles in the U.S. In Case You Missed It - Agentic Ransomware Registers First Major Hit - Apple Partners With Broadcom to Produce Over 15 Billion U.S.-Made Chips - Toyota Says $3.6B Investment Will Add 2,000 Jobs at Texas Plant Please make sure to like, subscribe and share the podcast. And to email the podcast, you can reach any of us at Jeff, Anna or [email protected], with “Email the Podcast” in the subject line. Subscribe to our daily and weekly newsletters.

The Today in Manufacturing Podcast is brought to you by the editors of Manufacturing.net and Industrial Equipment News (IEN).  This episode is brought to you by Oracle NetSuite. Most organizations have more dashboards, reports, and data than ever before, yet decisions still get made on gut feel or anecdote. The gap is not data, it’s action.  In this practical field guide, Bernie Smith, Director of Made to Measure KPIs and KPI Academy, shares his approach to connecting KPIs to real decisions and measurable improvement.  Learn how to:  • Make dashboards useful instead of “wallpaper”  • Choose measures people actually trust and act on  • Define clear responses when a KPI moves • Design targets that encourage the right behaviors  • Connect strategy, measurement, and action Download "Beyond the Dashboard" right now. https://www.manufacturing.net/formstack/beyond_the_dashboard?utm_source=podcast  Every week, we cover the three biggest stories in manufacturing, and the implications they have on the industry moving forward.  This week: U.S. Steel Commits $475M to Install New Quench & Tempering Line https://www.ien.com/22969501  U.S. Steel just announced plans to invest some $475 million for the installation of a new quench & tempering (Q&T) line at its Fairfield Tubular Operations in Alabama.  'World's First' Fusion Power Plant Given Regulatory Clearance https://www.ien.com/22969244 Helion is a Washington-based fusion energy company. Last week, the company claimed to become the first company in the world to secure the regulatory licenses needed for a fusion power plant.  Ford Motor Sues to Shut Down Lemon Law Fraud  https://www.ien.com/22969305  Last week, Ford Motor filed a lawsuit against Quill & Arrow. The lawsuit alleges rampant lawsuit abuse. Yes, it is a lawsuit over lawsuits, but this one comes after Quill & Arrow filed thousands of Lemon Law cases every year against Ford and other automakers.  In Case You Missed It  LA Mayor Bass Declares Emergency to Secure Resources to Help Fight Warehouse Fire  https://foodmanufacturing.com/22969301/  Authorities said the cold-storage warehouse has "85 million pounds of frozen food inside."  Quantum Sensors Could Spot Hidden Damage https://www.ien.com/safety/article/22969249/quantum-sensors-could-spot-hidden-damage-in-the-thousands-of-structurally-deficient-us-bridges These sensors could help engineers pinpoint problems before they get worse.  Boston Dynamics Announces $100 Million U.S. Expansion Effort https://www.ien.com/automation/news/22969587/boston-dynamics-announces-100-million-us-expansion-effort  Boston Dynamics yesterday announced plans to transform a 323,000 square foot facility in Waltham, Massachusetts, into an advanced robotics and AI center. The company will invest $100 million in the project and anticipates creating 1,250 new jobs by 2033.  Please make sure to like, subscribe and share the podcast. And to email the podcast, you can reach any of us at Jeff, Andy or [email protected], with “Email the Podcast” in the subject line. Subscribe to our daily and weekly newsletters.  #Manufacturing #ManufacturingNews #USSteel #FusionEnergy #Ford #Industry40 #Engineering #EnergyIndustry #Infrastructure #IndustrialNews