Advertise on podcast: RC Plane Lab

Ron and Dave catch up after a busy couple of weeks. They talk about the separate interviews with AMA Executive Vice President candidates Phil Tallman and Randy Gibson, why members should hear from both candidates, and how easy it can be to overlook the election information and ballot. The ballot must be postmarked by November 6, 2026.   Ron shares his first experience as Contest Director at Illini Warbirds & Classics, including some memorable aircraft and what he learned behind the scenes. The guys also check out E-flite’s new Micro P-47 Thunderbolt and Dave’s new Strix Shadow Seeker X. They wrap up with an update on the new learning, troubleshooting, calculator, and podcast resources at RCPlaneLab.com.   In This Episode: 00:14 – Ron and Dave catch up 00:54 – AMA EVP candidate interviews and election information 05:40 – Dave’s weekend flying and a confusing fall fly-in 10:30 – Ron’s first time as CD at Illini Warbirds & Classics 21:34 – E-flite’s new Micro P-47 Thunderbolt 24:23 – Dave’s Strix Shadow Seeker X and its first hand launch 33:18 – New resources at RCPlaneLab.com   E-flite Micro P-47 Thunderbolt: https://www.horizonhobby.com/product/e-flite-micro-p-47-thunderbolt-625mm-bnf-basic-with-as3x-and-safe-select/EFL07050.html   Listen to both candidate interviews, read their statements, and make your own decision. If you have a question, a topic you’d like us to cover, or just want to get in touch, visit https://rcplanelab.com/.   Until next time, may your landings be gentle.

Ron talks with AMA Executive Vice President candidate Phil Tallman about the Academy of Model Aeronautics and the challenges facing model aviation. They discuss declining membership, the value AMA provides, support for local clubs and flying sites, communication and transparency, competition and recreational flying, advocacy, and the financial decisions ahead. Tallman shares examples from his work as an AMA district vice president and outlines what he hopes to bring to the executive vice president position. This conversation is part of RC Plane Lab’s interviews with the candidates and gives AMA members a chance to hear directly from each of them.

Ron talks with AMA Executive Vice President candidate Randy Gibson about the Academy of Model Aeronautics and the challenges facing model aviation. They discuss declining membership, the value AMA provides, support for local clubs and flying sites, communication and transparency, competition and recreational flying, advocacy, and the financial decisions ahead. Gibson shares examples from his work as an AMA district vice president and outlines what he hopes to bring to the executive vice president position. This conversation is part of RC Plane Lab’s interviews with the candidates and gives AMA members a chance to hear directly from each of them.

Ron's Falcon 56 was supposed to make its first flight, but an old pushrod had other plans. That turned out to be a good reminder that just because an old airplane looks ready to fly doesn't mean it is.   We also talk about our trip to the SIRS vintage fly-in, some really cool old airplanes, and why it took Dave four tries to finally land his Wonder somewhere other than the bean field.   Then we take a look at a few new airplanes:   - "Skynetic Micro T-33 Shooting Star 30mm EDF" (https://motionrc.com/products/skynetic-t-33-shooting-star-micro-30mm-edf-jet-with-gyro-str-sky1075-003) - "Freewing F-35C Lightning II 110mm EDF" (https://www.freewing-model.com/freewing-f-35c-lightning-ii-12s-110mm-edf-jet-arf-plus-rc-airplane.html) - "Skynetic P-12E Pursuit 1100mm Biplane" (https://motionrc.com/products/skynetic-p-12e-pursuit-biplane-1100mm-43-3-wingspan-pnp-sky1076-001)   In This Episode   - 02:50 – Ron's Falcon 56 and its failed pushrod - 06:22 – Bringing old RC airplanes back to life - 08:58 – Nitro, four-strokes, and old-school setups - 18:03 – Spektrum versus FrSky - 22:57 – Our trip to the vintage fly-in - 39:32 – Dave versus the bean field - 52:34 – A few new RC airplane releases   If you enjoyed the episode, make sure you're subscribed so you don't miss the next one. If you've got a question, a topic you'd like us to cover, or just want to tell Dave how to keep his airplanes out of the beans, head over to https://rcplanelab.com/ and let us know.

Piper joins Ron, Dave, and Tom for a lively recap of RC Fest! She shares her adventures with the RC car “Try Me” courses and introduces the two new vehicles she brought home—including an ARRMA Mojave Grom BLX. The crew also talks night flying, Tom’s new airplane trailer, Ron’s Falcon 56 nitro project, a pair of bargain FMS Super Scorpions, and the impressive new E-flite Pilatus PC-21. Ron returns to the Ring of Fire seeking redemption after his memorable crash two years ago, while Tom celebrates having his first review published in Model Aviation. Along the way, Piper asks the important questions, the RC car collection keeps growing, and bedtime becomes increasingly negotiable. In this episode: Tom flies Dave’s fleet of night flyers Tom finds a custom 7-by-12-foot tandem-axle trailer Updates on Dave’s and Ron’s latest airplane projects Piper tries RC NASCAR racing and RC soccer New Axial and ARRMA vehicles join the collection Ron scores two FMS Super Scorpions A successful return to RC Fest’s Ring of Fire First impressions of the E-flite Pilatus PC-21 Tom’s CAP 231 review appears in Model Aviation A look at upcoming Warbirds, Classics, and vintage fly-ins

Tom is home and back in the studio with Ron and Dave—but only for this episode during his brief visit. Tom’s wife, Lori, is also there and briefly joins the conversation to settle an argument about exactly how Ron was persuaded to take a day off for their trip to Dynamic Balsa. The episode begins on a personal note as Dave discusses the loss of his wife earlier that morning. He explains why he still decided to record with his friends and reminds everyone how important it is to spend time with the people closest to them. Ron recaps his visit to the Illini Jets event at Eli Field, including the strong turnout, impressive turbine aircraft, a massive twin-turbine F-14, and some of the best food the guys have ever seen served at an RC fly-in. The guys then examine the new Skynetic F-35C Lightning II Micro 30mm EDF Jet. Although its flight performance appears promising, they have plenty to say about its molding, oversized panel lines, painted canopy, unusual underside, and price. They also preview several upcoming Illinois RC events: Horizon Hobby RC Fest — August 29 at Eli Field in Monticello, Illinois Streator Fall Scramble Warbirds & Classics — September 10–12 in Streator, Illinois SIRS Vintage Fly-In — September 12 near McLean, Illinois Illini Warbirds and Classics — September 24–26 at Eli Field in Monticello, Illinois Finally, Ron and Tom recount their visit to Dynamic Balsa. Ron went looking for servos and a SIG Kavalier, forgot the servos entirely, and came home with an unidentified vintage glow-powered airplane. The guys inspect its K&B engine, old 72 MHz radio equipment, unusual appearance, and chances of successfully returning to the air. Tom also adds a Slow Ultra Stick to his hangar, while Dave discusses his BluFo, Yak 55, Blue Max, Goldberg Cub, and the restoration of Reggie’s older E-flite Ultimate. The episode closes with an important maintenance reminder: inspect the nylon clevises, snapper keepers, and other plastic control-linkage components in your airplanes. Heat, age, and dry storage conditions can make these parts brittle enough to fail in flight. Timestamps 00:12 – Tom is home and in the studio for one episode 04:04 – A personal update from Dave 07:56 – Ron’s visit to the Illini Jets event 16:10 – The Skynetic F-35C Micro EDF 24:36 – RC Fest and upcoming Illinois RC events 35:59 – The SIRS Vintage Fly-In 40:17 – Ron and Tom’s trip to Dynamic Balsa 47:31 – Ron’s unidentified vintage glow airplane 01:01:42 – Tom buys a Slow Ultra Stick 01:03:44 – Dave’s building and restoration projects 01:06:33 – Inspecting brittle nylon control linkages 01:07:34 – Illini Warbirds and Classics at Eli Field

Ron and Dave catch up after a busy stretch and dive into a surprisingly full evening of RC activity. Ron rediscovers a long‑forgotten Carbon‑Z Yak in his basement and gives it a modern electronics refresh, while Dave wraps up his Beaver build and deals with a paramotor battery that’s well past retirement age. The guys recap a night‑flying session filled with great flights, blinding LEDs, and an unbelievable swarm of moths. They also talk about upcoming events, new gear—including Ron’s Losi NASCAR—and walk through how each of them powers and controls lights on their aircraft, from commercial setups to Dave’s homemade servo‑based switches. A relaxed, fun catch‑up episode with plenty of RC tinkering talk.

Ron and Dave return after a summer break to talk flying, family updates, and shop projects. They highlight five new or reissued RC airplanes and touch on the science of wing loading. The episode wraps with Dave’s $50 swap‑meet Beaver restoration.    Freewing JL‑8 80mm EDF Jet Durafly Curtiss P‑40 Warhawk V2 (Aleutian Tiger) Freewing Eurofighter Typhoon V2 90mm EDF Jet Skynetic P‑47 Thunderbolt “Passionate Patsy” 750mm HobbyKing Kitfox Sportplane (Plug & Play)

Ron, Tom, and Dave cover extreme summer weather, camping with RC rock crawlers, a new UMX‑sized OV‑10 release, their local club fly‑in recap, and a deep dive into how each of them sets up their vehicles for hauling airplanes.

The guys are back together — sort of — and this week they dive into one of the most common listener questions: How should you assign switches on your radio? After some classic RC Plane Lab banter (Tommy’s “witchy” mic, canceled night flying, and Ron rediscovering his forgotten UMX Viper), the crew breaks down how they each map flaps, gear, lights, rates, gains, and AS3X functions across their transmitters. They compare Spektrum iX setups, talk about why consistency matters more than “the right way,” and share lessons learned — including how Ron’s F‑18 crash came down to one simple gain‑tuning mistake. Whether you’re new to programming radios or just want to refine your habits, this episode is packed with practical, real‑world insight from three pilots who definitely don’t always do it the same way.

Tom makes a surprise remote return to the show from his extended deployment in the U.S. Southwest desert. The guys catch up on flying, mishaps, new airplanes, swap meets, repairs, and the ongoing saga of Reggie’s questionable preflight habits. Ron shares the dramatic loss of his X‑Fly Hornet, Dave talks about resurrecting and repainting an F‑16, and Tom confesses to “Tomming” his Turbo Timber into the gravel. The crew also dives into gliders, paramotors, truck upgrades, and future flying plans.

A couple of new releases hit the RC scene, and a day at the field turns into a mix of flying, tinkering, and trailer‑powered success. With a few maiden flights, some quick repairs, and plenty of hangout time, Episode 210 is all about enjoying the hobby and the moments that come with it.

In this episode we talk about the sudden closure of WACO Aircraft Company and what it means for full‑scale aviation fans. Ron goes over the latest trailer upgrades, including the rooftop AC and the new Spektrum S450 charging setup. Dave makes progress assembling Ron’s RACores Yak‑55, and we wrap up with an update on the new Beginner’s Lounge on RCPlaneLab.com. Head over to https://beginnerslounge.rcplanelab.com!

Tune in to hear how the 2026 Toledo RC Swap Meet and Expo went for the guys!

In this episode, Dave kicks things off with the story behind his April Model Aviation article, “From Trash to Treasure,” and finally shares the full tale behind the project that inspired it. From there, the guys dive into a wave of new releases hitting the RC world: Dynam’s E‑2C Hawkeye with its rotating radar dome E‑flite’s latest lineup — Beechcraft D18/RC‑45J 1.5m, V1200 1.2m, 2m Conscendo, and the new HobbyZone Trojan Motion RC’s Flightline P‑51 HobbyKing’s Tundra TPX 3D profile plane and the Durafly Brewster F2A Buffalo V2 Banana Hobby’s massive JetRuler 1/9 F‑22 Raptor 2.1m composite turbine jet The conversation takes a reflective turn as the crew talks about Dumas closing its doors after 75 years — a tough loss for the hobby, especially for fans of their classic rubber-powered airplanes and iconic boat kits. Then it’s on to swap‑meet season. The guys recap the Eli Swap Meet and why the small shows still deliver some of the best surprises and deals. With Toledo right around the corner, Ron shares the fleet he’s bringing to sell — from the V‑22 Osprey and UMX Beast to the Freewing F‑35, FMS Explorer, and more — and debates whether it’s finally time to pull receivers now that prices have dropped again.